Southland Pipe Nipple 10207 Galvanized Pipe Nipple

Southland Pipe Nipple 10207 Galvanized Pipe Nipple Review

Southland Pipe Nipple 10207 Galvanized Pipe Nipple Feature

• pipe nipple galvanized galv

Welded steel pipe. Hot dipped galvanized, meets ASTM A 53 standards. Schedule 40, standard pipe.

IMPERIAL 98182 GALVANIZED IRON PIPE NIPPLE 3/8x6"(PACK OF 5)

IMPERIAL 98182 GALVANIZED IRON PIPE NIPPLE 3/8x6"(PACK OF 5) Review

IMPERIAL 98182 GALVANIZED IRON PIPE NIPPLE 3/8x6"(PACK OF 5) Feature

• "IMPERIAL" IRON PIPE NIPPLE
• Length: 6"
• Schedule 40
• Pipe Thread: 3/8
• 150 pound steam pressure.

"IMPERIAL" IRON PIPE NIPPLE Length: 6" Schedule 40 Pipe Thread: 3/8 150 pound steam pressure. Conforms to American standards. 300 psi rating: cold water, oil, or gas. Meets or exceeds all applicable ASTM and ANSI standards

1 1/4" x 1/2" Galvanized Standard Pipe Nipple

1 1/4" x 1/2" Galvanized Standard Pipe Nipple Review

1 1/4" x 1/2" Galvanized Standard Pipe Nipple Feature

• Worldwide Sourcing 1-1/4X4-1/2 Galvanized Pipe Nipple 11/4X41/2G
• SOUNDBEST INT. / CHINA

Right hand threads.

SELKIRK METALBESTOS 186060SELKIRK METALBESTOS 186060 ROUND GAS VENT PIPE TYPE B 6"X5 6RV-60

SELKIRK METALBESTOS 186060SELKIRK METALBESTOS 186060 ROUND GAS VENT PIPE TYPE B 6"X5 6RV-60 Review

SELKIRK METALBESTOS 186060SELKIRK METALBESTOS 186060 ROUND GAS VENT PIPE TYPE B 6"X5 6RV-60 Feature

• Type "B"
• OD = ID + 1/2"
• Installed length 1-1/2" less than listed length
• Aluminum inner wall, galvanized outer wall
• For gravity draft venting of LP or Natural Gas appliances

Type "B" OD = ID + 1/2" Installed length 1-1/2" less than listed length Aluminum inner wall, galvanized outer wall For gravity draft venting of LP or Natural Gas appliances 100 million BTU/hr. max, 500 deg. max. Not for wall furnaces UL listed 10 yr. warranty Boxed 6RV-60 6" x 5

Anderson Fittings 38116-08 90degree Brass Street Elbow 1/2"

Anderson Fittings 38116-08 90degree Brass Street Elbow 1/2" Review

Anderson Fittings 38116-08 90degree Brass Street Elbow 1/2" Feature

• "ANDERSON METAL" STREET ELBOW
• For air, oil, water & gas.
• For use with water or steam.
• Made of brass.
• Standard screwed.

G06080 One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. 90 DEGREE STREET ELBOW FEMALE PIPE X MALE PIPE IPT Inches=1/2

Anderson Fittings 38100-12 90degree Brass Elbow 3/4"

Anderson Fittings 38100-12 90degree Brass Elbow 3/4" Review

Anderson Fittings 38100-12 90degree Brass Elbow 3/4" Feature

• "ANDERSON METAL" ELBOW
• For air, oil, water & gas.
• For use with water or steam.
• Made of brass.
• Standard screwed.

ANDERSON METAL" ELBOW For air, oil, water & gas. For use with water or steam. Made of brass. Standard screwed. Elbow is of 90 degree. 3/4" IPT.

Mueller Industries 2-1/2' Blk Tee 520-609Bc Black Pipe Tees

Mueller Industries 2-1/2' Blk Tee 520-609Bc Black Pipe Tees Review

Mueller Industries 2-1/2' Blk Tee 520-609Bc Black Pipe Tees Feature

• "MUELLER" BLACK TEE
• Size: 2-1/2".
• Black Tee.
• Malleable iron fitting.

2-1/2', Black Tee, Malleable Iron Fitting.

King Brothers Inc. U-1250-T 1-1/4-Inch Threaded PVC Schedule 80 Union, Gray

King Brothers Inc. U-1250-T 1-1/4-Inch Threaded PVC Schedule 80 Union, Gray Review

King Brothers Inc. U-1250-T 1-1/4-Inch Threaded PVC Schedule 80 Union, Gray Feature

• Made in the USA with quality PolyOne Schedule 80 PVC II material
• NSF certified to be drinking water safe and low lead approved
• UPC/IAPMO listed
• Pressure rated to 235 psi at 73F Degree
• Details and certifications available www.kbico.com

Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved.

IMPERIAL 98593 GALVANIZED IRON PIPE NIPPLE 2"x6"(PACK OF 5)

IMPERIAL 98593 GALVANIZED IRON PIPE NIPPLE 2"x6"(PACK OF 5) Review

IMPERIAL 98593 GALVANIZED IRON PIPE NIPPLE 2"x6"(PACK OF 5) Feature

• "IMPERIAL" IRON PIPE NIPPLE
• Length: 6"
• Schedule 40
• Pipe Thread: 2"
• 150 pound steam pressure.

"IMPERIAL" IRON PIPE NIPPLE Length: 6" Schedule 40 Pipe Thread: 2" 150 pound steam pressure. Conforms to American standards. 300 psi rating: cold water, oil, or gas. Meets or exceeds all applicable ASTM and ANSI standards.

Anderson Metals Corp 1/4' Cmp Shut Off 59206-04 Flare Fittings Cocks

Anderson Metals Corp 1/4' Cmp Shut Off 59206-04 Flare Fittings Cocks Review

Anderson Metals Corp 1/4' Cmp Shut Off 59206-04 Flare Fittings Cocks Feature

• Anderson Metals #59206-04 1/4" CMP Shut Off
• ANDERSON METALS CORP

1/4' Compression Shut Off, Bulk.

IMPERIAL 90336 BRASS PIPE RED COUPLING 3/8X1/4

IMPERIAL 90336 BRASS PIPE RED COUPLING 3/8X1/4 Review

IMPERIAL 90336 BRASS PIPE RED COUPLING 3/8X1/4 Feature

• "IMPERIAL SUPPLIES" COUPLING
• Brass Pipe Thread Reducing Coupling Fitting.
• Dry seal pipe threads.
• Vibration resistance: fair
• Working pressure up to 1,200 psi.

"IMPERIAL SUPPLIES" COUPLING Brass Pipe Thread Reducing Coupling Fitting. Brass Pipe Thread Fittings are designed and manufactured to meet or exceed ASA, ASME, SAE, and Mil. specifications Dry seal pipe threads. Vibration resistance: fair Working pressure up to 1,200 psi. Can be used with brass or iron pipe. Temperature Range: -65° F. to 250° F. Pipe Thread: 3/8-18 x 1/4-18 Cross Reference: 3300 x 4 x 4

CHARLOTTE PIPE \u0026 FOUNDRY PVC 021035200HA ADAPTER PVC40 3/4MPTXFHT

CHARLOTTE PIPE \u0026 FOUNDRY PVC 021035200HA ADAPTER PVC40 3/4MPTXFHT Review

CHARLOTTE PIPE \u0026 FOUNDRY PVC 021035200HA ADAPTER PVC40 3/4MPTXFHT Feature

• Meets ASTM D-2466
• White

Sold as each. Meets ASTM D-2466. White. . 3/4" x 3/4" MPT x FHT. Manufacturer's number: PVC 021035200HA. Country of origin: United States. Distributed by Charlotte Pipe & Foundry.

Keeney 35-8WK Branch Tailpiece, Direct Connect or Slip Joint 1-1/2-Inch by 8-Inch with 5/8-Inch O.D. Dishwasher Branch, White

Keeney 35-8WK Branch Tailpiece, Direct Connect or Slip Joint 1-1/2-Inch by 8-Inch with 5/8-Inch O.D. Dishwasher Branch, White Review

Keeney 35-8WK Branch Tailpiece, Direct Connect or Slip Joint 1-1/2-Inch by 8-Inch with 5/8-Inch O.D. Dishwasher Branch, White Feature

• Branch tailpiece for dishwasher
• Inlet: 1-1/2-Inch, Length: 8-Inch
• Branch: 5/8-Inch
• Direct connect or slip
• White polypropylene

1 1 2" x 8" dishwasher branch tailpiece. Direct connect or slip joint with 5 8" branch. White plastic. Bagged.

Webstone Valve 23402 N/A 1/2" Pipe Repair Clamp 23402

Webstone Valve 23402 N/A 1/2" Pipe Repair Clamp 23402 Review

1/2" Pipe Repair ClampNote: Image may slightly differ than actual product

ACE FITTINGS 511-227BG MERCHANT COUPLING GALVANIZED STEEL 1-1/2"

ACE FITTINGS 511-227BG MERCHANT COUPLING GALVANIZED STEEL 1-1/2" Review

ACE FITTINGS 511-227BG MERCHANT COUPLING GALVANIZED STEEL 1-1/2" Feature

• 1-1/2"
• Galvanized Steel
• For non-plumbing applications

MERCHANT COUPLING 1-1/2" Galvanized Steel For non-plumbing applications

Gilmour 2939Q Premium Complete Garden Hose Quick-Connect Set

Gilmour 2939Q Premium Complete Garden Hose Quick-Connect Set Review

Gilmour 2939Q Premium Complete Garden Hose Quick-Connect Set Feature

• Eliminates time consuming on/off threading.
• Durable, impact resistant, rust proof polymer construction.
• Interchangeable with most polymer quick connector systems.
• Includes 1 female hose end connector with water shut-off valve, 2 male hose end adapters, 1 female faucet connector, and 1 male faucet adapter

Gilmour 2939Q Complete Connector Starter KitGilmour 2939Q Complete Connector Starter Kit Features:; Provides quick and easy connections to faucet, hose, and hose end accessories; Eliminates time consuming on/off threading; Includes 1 female hose end connector with water shut-off valve, 2 male hose end adapters, 1 female faucet adapter, and 1 male faucet adapter; Durable, rustproof polymer construction; Interchangeable with most polymer quick connector systems; Carded

Flex-Drain 54001 Flexible/Expandable Landscaping Drain Pipe, Solid, 4-Inch by 8-Foot

Flex-Drain 54001 Flexible/Expandable Landscaping Drain Pipe, Solid, 4-Inch by 8-Foot Review

Flex-Drain 54001 Flexible/Expandable Landscaping Drain Pipe, Solid, 4-Inch by 8-Foot Feature

• Solid drain-pipe expands in length from 2 to 8-feet - compatible with most traditional 3-inch and 4-inch corrugated pipe and 4-inch pvc
• Solid pipe helps move water to a drain from your downspout diverter, rain gutter, and more
• Exceeds the following astm standards - flex-drain outperforms the leading brand of corrugated pipe with brittleness, stiffness, and joint integrity
• Engineered to outperform - Installs faster, requires 1/5th the storage and transport space, and perforated pipe has 14% better flow rate
• Advanced design for superior performance - outperforms in freeze and thaw conditions, also has 30-percent higher load-bearing rating from our patented peak and valley design

a solid pipe, appropriate in applications that involve moving water from one point to another (i.e. Away from downspouts). Does not allow water to seep in or out anywhere except pipe ends. Works effortlessly with our complete system of connectors, couplers and adaptors. Exceeds all applicable astm standards. Made with no-break copolymers for professional grade strength and integrity. Proprietary peak and valley design offers greater surface area and a 30-percent higher load-bearing rating than standard corrugated pipe. Guaranteed not to split, crack or break when used in accordance with local building codes. Flex-drain is compatible with virtually all traditional 3-inch and 4-inch corrugated pipe and 4-inch pvc. All flex-drain products are proudly Made In America.