PVC 90 Degree Elbow, 6"

PVC 90 Degree Elbow, 6" Review

PVC 90 Degree Elbow, 6" Feature

• Genova Products Inc 6In Pvc Drain 90Deg Elbow 40760
• GENOVA PRODUCTS

Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a short turn quarter bend. 4" and 6" meet ASTM D3034.

Cash Acme U140A Shark Bite 1-Inch Shark Bite MNPT Male Adaptor

Cash Acme U140A Shark Bite 1-Inch Shark Bite MNPT Male Adaptor Review

Cash Acme U140A Shark Bite 1-Inch Shark Bite MNPT Male Adaptor Feature

• Tee coupling , this item cannot ship to CA or VT
• MNPT male adaptor
• Fastest easiest way to join copper, CTS, CPVC and PEX piping in any combination
• No soldering, clamps, unions or glue
• Certified to 20 psi and 200-Degree Fahrenheit

Male iron pipe end. Brass push fitting. UPC, IAPMO, and NSF 61 certified and approved. The fitting can be used with copper, PEX, and CPVC and is rated at 200 F., 200 P.S.I. It is made of 1 piece DZR brass, which is a noncorrosive, low lead material. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged.

1/2" 3-way Elbow PVC Fitting Connector

1/2" 3-way Elbow PVC Fitting Connector Review

1/2" 3-way Elbow PVC Fitting Connector Feature

• Ideal for creating corners in square PVC applications.
• Made from impact proof, ultra-premium furniture-grade PVC.
• Superior, glossy surface finish.
• UV Stabilized for outdoor color retention.
• Tapered ends for a clean, transitional appearance.

This is not your standard plumbing-grade PVC fitting. FORMUFIT PVC fittings let you create anything with PVC pipe! This elbow connector joins 1/2" (0.840") PVC pipe at three points on multiple planes for corner joints.

NIBCO ABS Pipe Fitting, Bushing, Schedule 40, 3" Spigot x 2" Hub

NIBCO ABS Pipe Fitting, Bushing, Schedule 40, 3" Spigot x 2" Hub Review

NIBCO ABS Pipe Fitting, Bushing, Schedule 40, 3" Spigot x 2" Hub Feature

• ABS-DWV (drain, waste and vent) fittings are used for residential and commercial sanitary systems; Do not test or use with compressed air or other gases
• Solvent weld connections; Never use primer with ABS
• Used with ABS DWV pipe
• 3" Spigot x 2" Hub
• Service temperature range: -40°F to 180°F

The NIBCO ABS DWV flush bushing is used in residential and commercial drain, waste and vent systems. The ABS DWV flush bushing features a spigot x hub connection and provides a means for reducing the size of the line. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

Cash Acme U3008A Shark Bite Push-Fittings Slip Coupling, 1/2-Inch

Cash Acme U3008A Shark Bite Push-Fittings Slip Coupling, 1/2-Inch Review

Cash Acme U3008A Shark Bite Push-Fittings Slip Coupling, 1/2-Inch Feature

• The slip coupling simplifies repair by doing the job that two couplings and extra pipe used to do , this item cannot ship to CA or VT
• One end of the coupling has a stop, allowing the other end to slide freely over the end of a pipe
• The push-fitting can be release with a disconnect tool and slide back onto the other end of the pipe for successful leak repair
• Easy quick push-fitting connectors CTS Copper
• Slip couplings should only be used on Copper

Repair copper pipe easily. 1 end of coupling does not have a stop, which allows you to slide coupling on to pipe and then slide back to cover where pipe is cut out. Brass push fitting. UPC, IAPMO, and NSF 61 certified and approved. The fitting should be used with copper only and is rated at 200 F., 200 P.S.I. It is made of 1 piece DZR brass, which is a noncorrosive, low lead material. Fittings can be buried and placed behind drywall. Fittings are removable and reuseable. Product is individually bagged.

Rubber Winterizing Expansion Plug 1.25" Fitting, 1.5" Pipe, Plug Size 9

Rubber Winterizing Expansion Plug 1.25" Fitting, 1.5" Pipe, Plug Size 9 Review

Rubber Winterizing Expansion Plug 1.25" Fitting, 1.5" Pipe, Plug Size 9 Feature

• nylon wing nut
• tapered sides allows use in variable openings
• Stainless steel screw & washers

Rubber Winterizing Expansion Plug 1.25" Fitting, 1.5" Pipe, Plug Size 9

Keeney K835-10 3-Inch Toilet Flush Valve Fits American Standard, Kohler, Eljer or Any Flush Valve with Similar Thread Size, Grey, Green

Keeney K835-10 3-Inch Toilet Flush Valve Fits American Standard, Kohler, Eljer or Any Flush Valve with Similar Thread Size, Grey, Green Review

Keeney K835-10 3-Inch Toilet Flush Valve Fits American Standard, Kohler, Eljer or Any Flush Valve with Similar Thread Size, Grey, Green Feature

• 3-Inch Toilet flush valve
• Fits American standard, Kohler, Eljer toilets or any flush valve with similar thread size
• Adjustable no cut overflow tube
• Adjustable water saving flapper
• Includes all nuts and washers

Fits American standard, Kohler, Eljer, or any flush valve with similar thread size. Includes adjustable water saving flapper with timing cone.

Anvil 8700141602, Steel Pipe Fitting, Nipple, 1" NPT Male x 12" Length, Black Finish

Anvil 8700141602, Steel Pipe Fitting, Nipple, 1" NPT Male x 12" Length, Black Finish Review

Anvil 8700141602, Steel Pipe Fitting, Nipple, 1" NPT Male x 12" Length, Black Finish Feature

• Nipple for joining two pipes or extending pipe length
• Male National Pipe Taper (NPT) threads on both ends for connecting female threaded pipes and fittings
• Made from steel for greater rust resistance than iron
• NPT threads for creating tighter seals than straight threads
• Meets specifications ASTM A53 and ASME B 1.20.1 for quality assurance

This Anvil nipple is a schedule 40 steel pipe fitting with a black finish and male National Pipe Taper (NPT) threads on both ends for joining two pipes or extending pipe length. It has NPT threads for creating a tighter seal than straight threads. This fitting is made of steel and has a black finish to provide greater rust resistance than iron and can be used for oil and gas applications. This schedule 40 nipple meets specifications ASTM A53 and ASME B 1.20.1 for quality assurance.

Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

Anvil International provides pipe products and design services. The company, founded in 1850 and headquartered in Portsmouth, NH, meets International Organization for Standardization (ISO) 9001:2000 standards and is certified by the American Petroleum Institute (API). Its fittings meet American Society for Testing and Materials (ASTM) and American Society of Mechanical Engineers (ASME) specifications.

Mr. Heater F271470 15' Propane Appliance Hose Assembly with 3/8" Male Pipe Thread x 3/8" Female Pipe Thread

Mr. Heater F271470 15' Propane Appliance Hose Assembly with 3/8" Male Pipe Thread x 3/8" Female Pipe Thread Review

Mr. Heater F271470 15' Propane Appliance Hose Assembly with 3/8" Male Pipe Thread x 3/8" Female Pipe Thread Feature

• High pressure hose
• Brass fitting
• One Year Warranty
• Made in USA
• 15 Foot hose
• 90 day warranty

15' propane hose w/ 3/8" male pipe x 3/8" female pipe thread used in addition to the existing hose for more length between propane cylinder and the portable propane appliances such as MH35LP, MH125LP, MH55FAV thru MH400FAVT, MH80CV units

Cash Acme U249A Shark Bite 1/2-by-1/2-Inch Drop Ear Elbow Push Pipe Fittings

Cash Acme U249A Shark Bite 1/2-by-1/2-Inch Drop Ear Elbow Push Pipe Fittings Review

Cash Acme U249A Shark Bite 1/2-by-1/2-Inch Drop Ear Elbow Push Pipe Fittings Feature

• Easy, quick push-fit connection of water distribution pipe , this item cannot ship to CA or VT
• Design certified and listed to ASSE 1061/NSF 61
• Listed by IAPMO and certified for potable and hydronic heating water distribution
• Certified for underground applications and as a manufactured joint without access panels
• Meet UPC, IPC and CUPC requirements

Brass push fitting. UPC, IAPMO, and NSF 61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F., 200 P.S.I. It is made of 1 piece DZR brass, which is a noncorrosive, low lead material. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged.

Anvil 8700164109, Malleable Iron Pipe Fitting, Floor Flange, 2" NPT Female, Black Finish

Anvil 8700164109, Malleable Iron Pipe Fitting, Floor Flange, 2" NPT Female, Black Finish Review

Anvil 8700164109, Malleable Iron Pipe Fitting, Floor Flange, 2" NPT Female, Black Finish Feature

• Floor flange for securing pipe to the floor or a wall
• Female National Pipe Taper (NPT) threads for connecting to a male threaded pipe
• Bolt holes to connect to flat surfaces
• Made from malleable iron for tensile strength
• Black finish resists rust in oil and gas applications

The Anvil floor flange is a class 150 malleable iron fitting with female National Pipe Taper (NPT) threads for securing pipe to floors or walls. It has NPT threads for creating a tighter seal than straight threads and bolt holes for connecting to flat surfaces. This flange is made of malleable iron, which has high tensile strength, and has a black finish that resists rust in oil and gas applications. This class 150 fitting meets standards ASTM A-197, ASME B 1.20.1, and ASME B 16.3 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure.

Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

Anvil International provides pipe products and design services. The company, founded in 1850 and headquartered in Portsmouth, NH, meets International Organization for Standardization (ISO) 9001:2000 standards and is certified by the American Petroleum Institute (API). Its fittings meet American Society for Testing and Materials (ASTM) and American Society of Mechanical Engineers (ASME) specifications.